James Burn Docupunch (Auto)

This versatile machine offers high volume punching power in a compact, free standing unit, designed to make light work of diverse punching needs.

It is operated by a single touch key control panel featuring present standard specifications.

Ergonomic styling allows all operations to be performed from the front of the machine (including tool changes). The perfect machine for any copy shop, university, printer or finishing house.

The Docupunch is capable of punching up to 60,000 sheets per hour. Vertical feed table for spilt beak system enable very reliable feed of around 8 sheets at each pass.

The flat feed system and straight paper path enable the docupunch to punch both standard sheets and tabbed work without any tool changes.

All tools come with de-selection pins for quick efficient changeover of jobs. The Die tool can be changed in under 1 minute.

Very quick set up via the set up mode which allows a single batch of sheets to be fed to the punching area and stopped. The side lays are then set with the jogger wheel, all located on the front of the machine. Once set, press go very simple.

Die tools available for, comb, coil, wire 2:1 & 3:1, thumb cut, and 2,3,4 hole punch.

We can also build a die to any specification required as a special one off.

We have these machines in several locations throughout the UK and welcome any demonstration.